Outer Limits 4x4 Board

hey guys just a question for anyone out there with some knowledge on rodeo's i have a 1998 4X2 v6 rodeo (so its on a 4wd chassis) and i was wondering if anyone knows how to drop them i wanna lower it about 3 inchs or so.
that would be awwsome if someone could fill me in on this!!
cheers
Darren

You are right, lowering something for us is sacrelege!

Cant help myself but do a search on the net. Heres something I found:
http://www.cardomain.com/memberpage/352473/4

Looks like fitting a block between the leafs and the axle is the go. Hopefully not the only way, looks a bit dodgey to me. Dunno about the front though...

Noel

G'day,
Most suspension places should be able to supply you with lowering blocks for the back. Although I don't think too many are made in 3 inch! 1.5 and 2 are common.

As for the front, the Castlemaine Rod Shop makes 2 inch drop spindles for Rodeos. These lower the front without reducing suspension travel.

I hope this helps

-Stuart

i got a 4inch kit for mine, it now looks ful lee sik


cost 230 bucks and it was new front bump stops, rear blocks, 4 shocks castor camber correction for the front with the torsion bar wound down.


NICK

are u for real? nick

hey nick, is ur rodeo a 4x2 on 4wd chassis??
if yes where did u buy this kit from. some more info on that would b sik man.send us a pic of ya car if u dont mind as well champ.
cheers
Darren

hey nick can you give me some more info on that kit you got man??
where u bought it from and a website or contact???

do u hav a pic of ur truck??

cheers darren

Try here

http://www.rodshop.com.au/chassis.htm

i will get a pick before i lift it. it is a 93 2wd with a 2002 model front end, high gloss white with chrome fittings and 18inch wheels.

the lowering kit consits of lower profile front bump stops, 4 shocks, and rear blocks. i got it from burnin customs.

www.burnincustoms.com


NICK