Outer Limits 4x4 Board

Whats the story with other getting a external roll cage approved for CAMS or Off Road regs? I am new to off road\tuff truck racing but have a a fair idea of on road\rally rules...... Any help or points it the right direction woulld be great!

what comps are you looking at entering?? id check with the organisers of those comps or go to some events and ask competitors.
i know that some people here have got "builders racks" joined to "side rails" and "side steps" joined to "bullbars" and have had them engineered.
have you used the search function??

well from what i know in nsw
technically and exo is not permitted
and a exo dose not count as a roll cage for CAMS OR CCDA it must be an internal cage i have looked into it as i`m building a car for OBC atm.

cheers

Mousie wrote:well from what i know in nsw
technically and exo is not permitted
and a exo dose not count as a roll cage for CAMS OR CCDA it must be an internal cage i have looked into it as i`m building a car for OBC atm.

cheers

from what ive seen exos are legal in nsw as long as they can be rolled by a ball approx 15cm diameter. ie no part of the cage protrudes 7.5cm or more above any panel (based on my estimate of 15cm ball).

if you do a search (gods i sound like one of the search nazis) some of the posts ive read before had links to this documentation. worth a read.

i know of a few that are engineered, evans bundy, theres another guy that has an exo engineered on his lux(from kurrajong way)
from memory, they class it as roof bars or builders racks or something.
do a search as there was a thread on this recently.

Thanx all for the info, found a few post and a bit of other info. Seam to be alot of diffrent rules\ideas depending on the comp. I'll keep on looking into it and post any interesting info...