Page 1 of 1
4.2 factory locker into rb30, are flanges the same
Posted: Mon Nov 16, 2009 7:42 pm
by THICKNICK
am wanting to put a factory locker off a 4.2 onto my rb30 and
just wanting to know if the tailshaft flanges are the same between 4.2 and the rb30.
cheers
nick
Re: 4.2 factory locker into rb30, are flanges the same
Posted: Mon Nov 16, 2009 10:28 pm
by jessie928
THICKNICK wrote:am wanting to put a factory locker off a 4.2 onto my rb30 and
just wanting to know if the tailshaft flanges are the same between 4.2 and the rb30.
cheers
nick
no they are different,
you need to swap the flanges over.
jes
Posted: Tue Nov 17, 2009 7:13 pm
by BIG GQ
Jes is correct you need to swap flanges over. You need a decent sized rattle gun to if you intend to do it yourself