Big jimny's that you know of
Posted: Tue Nov 17, 2009 5:20 pm
can you please just post a pic and some technical details of some big jimnys that you have come across
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
Big jimny's that you know of
Page 1 of 1
Posted: Tue Nov 17, 2009 8:07 pm
do a search for stimpy... was a weapon =)
Posted: Tue Nov 17, 2009 9:26 pm
yours might be about the only big one? 
did have pics of one i think overkill built?exo etc ill try find them
did have pics of one i think overkill built?exo etc ill try find them
Posted: Wed Nov 18, 2009 6:48 am
Posted: Thu Nov 19, 2009 9:35 am
russian , build by D&G in belgium ...... on 38 
Posted: Thu Nov 19, 2009 4:02 pm
haha wheres the up-travel?
Posted: Thu Nov 19, 2009 4:24 pm
Haha. Yeah, gets a massive 2inches
of up travel
of up travel
Posted: Thu Nov 19, 2009 5:48 pm
That's plenty.
Posted: Sat Nov 21, 2009 5:38 pm
http://www.coffsharbour4wd.com.au/worklog.html
Bulant - very nice Jimny build up that is getting around Coffs Harbour
Bulant - very nice Jimny build up that is getting around Coffs Harbour
Posted: Sat Nov 21, 2009 5:53 pm
Bulant is a nice truck, and the green exoed one that overkill build was awesome! chatted to the owner (dave i think) at one tufftruck, nice bloke
Posted: Sun Nov 22, 2009 7:48 pm
that overkill jimny is pretty nice and that one on pirate looks like it should be a ripper of a jimny
Posted: Sun Nov 22, 2009 7:49 pm
that overkill jimny is pretty nice and that one on pirate looks like it should be a ripper of a jimny
Posted: Fri Dec 11, 2009 6:36 pm
gday guys...
im currently running 5.5inch coils under my jimny
in the front i have rear rav 4 shocks in the front and 40series shocks in the rear all supplyed by dobbinson suspension rockhampton
i have had to make castor plates for front and rear to roll the diff bak to normal
im getting a cross memeber removed tuesday so the tail shaft wont hit when i roll the diff bak to normal to get zero castor.
i also extend the auto hub lines and wil have to cut the shock mounts and move them about 10mm inwards to fit castor plates on the rear...
i would add pic if i new how..
[/list][/code]
im currently running 5.5inch coils under my jimny
in the front i have rear rav 4 shocks in the front and 40series shocks in the rear all supplyed by dobbinson suspension rockhampton
i have had to make castor plates for front and rear to roll the diff bak to normal
im getting a cross memeber removed tuesday so the tail shaft wont hit when i roll the diff bak to normal to get zero castor.
i also extend the auto hub lines and wil have to cut the shock mounts and move them about 10mm inwards to fit castor plates on the rear...
i would add pic if i new how..
[/list][/code]
Posted: Fri Dec 11, 2009 8:29 pm
sounds pretty cool so all you need now is sierra transfer with reduction gears, 35's and lux diffs mine is almost finished but soughting out brakes is a nightmare.
Posted: Sat Dec 12, 2009 9:58 am
Not much Jimny left, but thought the pics were worthy. 
Posted: Sat Dec 12, 2009 10:22 am
that is awsome, i would so love mine to be like that i love the pipe roof..
Posted: Sat Dec 12, 2009 7:52 pm
Lux diffs in a Jimny...ROK88 wrote:sounds pretty cool so all you need now is sierra transfer with reduction gears, 35's and lux diffs mine is almost finished but soughting out brakes is a nightmare.
What would you be doing with your old
Jimny diffs?
Posted: Sat Dec 12, 2009 8:12 pm
well the diffs went to the tip as i had 6 rears but they were all brocken i still got front diff i think and housings oh and som yuri 4x4 hardened cv's that are unbreakable what do you need
Posted: Sat Dec 12, 2009 8:28 pm
Wouldnt of minded the front n rear centres.
But its all good.
Do you know if the CV's fit in the coily sierras?
But its all good.
Do you know if the CV's fit in the coily sierras?
Posted: Sat Dec 12, 2009 8:54 pm
im not to sure they might but i do have a front centre in good condition if you want it
Posted: Sat Dec 12, 2009 9:07 pm
Oh okay.
Thanks mate but I may have to do some
more research before anything happens.
I recently bent my rear diff housing (coily)
and I cant find a housing anywhere, im tryna
come up with alternitives to the coily rear diff.
I know the Jimny rear diff centre bolts directly
into the coily rear but im not sure if the fronts
are interchangable.
What $$$ you be after if i do decide to go that way?
Thanks mate but I may have to do some
more research before anything happens.
I recently bent my rear diff housing (coily)
and I cant find a housing anywhere, im tryna
come up with alternitives to the coily rear diff.
I know the Jimny rear diff centre bolts directly
into the coily rear but im not sure if the fronts
are interchangable.
What $$$ you be after if i do decide to go that way?
Posted: Sat Dec 12, 2009 9:12 pm
im not to sure what they are worth but does $100 sound reasnable
Posted: Sat Dec 12, 2009 9:22 pm
I'm keen. haha
PM sent.
PM sent.
Posted: Mon Dec 14, 2009 8:17 am
Posted: Tue Dec 15, 2009 11:41 am
Hey chase.rawlings, do you drive a red jimny? I think i've seen you driving around. I'm in a white hardtop zook with 31's and stupidly big spotties