Page 1 of 1
panhard-steering link Qs..
Posted: Fri May 21, 2004 11:33 am
by mud4b
do these have to be inline with each other ?or just the same lenght?
i have to fit a drop pitman arm and it is going to move the two out of line..
what can i do?drop the panhard mount?
Posted: Fri May 21, 2004 12:34 pm
by MYV84B
Yes the have to be parralel to each other
drop your panhard bracket is da go
they have to be parralel so when the suspesion compresses
both the panhard and draglink move in the same relationship
if they didnt on compresion u would get bump steer
Posted: Sun May 23, 2004 12:22 pm
by 65Mog
They should only run parallel if they are the same length, if they are different they will travel through a different arc, if they are different lengths and you put them parallel it will make bump steer worse.
what ever you drop the pitman arm by just drop the panhard the same.