Outer Limits 4x4 Board

Posted: **Sat Nov 21, 2009 10:52 am**

Hi All,

Finally put a turbo on my 1HZ 80 series and have turned the fuel adjust screw in for more fuel.

I now have a fuel leak from this adjusting screw.

Is there a gasket or O ring that has been damaged? If so, is it easily replaced, or is it within the top cover?

Any help would be greatly appreciated.

Thanks,

Tom.

Posted: **Sat Nov 21, 2009 2:56 pm**

Possibly sorted.

I bit the bullet and pulled the fuel adjust screw out. There is an O ring on the screw shaft.

Looks like I'll have to ring around on Monday morning to try and find a new one.

Cheers,

Tom.

Posted: **Sat Nov 21, 2009 3:31 pm**

teflon tape fixed mine

Posted: **Sat Nov 21, 2009 5:29 pm**

Screw it in until its tight........................

Outer Limits 4x4 Board

1HZ Diesel Fuel Pump Leak from Fuel Adjust Screw

1HZ Diesel Fuel Pump Leak from Fuel Adjust Screw