Page 1 of 1
Control arms!
Posted: Mon Nov 23, 2009 5:05 pm
by get it up there
Hey guys.. just a quick question - im after a measurement (please!!) of the upper and lower control arms, off an 80 series cruiser. Also, do the lengths vary between the years or anything? Thanks heaps!!
Re: Control arms!
Posted: Mon Nov 23, 2009 7:57 pm
by crankycruiser
get it up there wrote:Hey guys.. just a quick question - im after a measurement (please!!) of the upper and lower control arms, off an 80 series cruiser. Also, do the lengths vary between the years or anything? Thanks heaps!!
the lenghts dont vary, but the earlier 80's had heaps beefier arms!
I'll grab a measurement for ya tommora!
Posted: Mon Nov 23, 2009 8:21 pm
by Struth
80 series lowers are 700mm eye to eye.
Don't know about uppers though.
Cheers
Posted: Mon Nov 23, 2009 8:32 pm
by pinkfloyddsotm
400mm eye to eye ,maybe a couple mm under for the uppers.
Posted: Mon Nov 23, 2009 9:23 pm
by get it up there
thanks heaps fellas!! By the measurements i have got, theres bugga all difference compared to the GQ's lengths. Im about to do a coil conversion in the rear of my sierra.. just trying to source arms which will be tough enough and long enough to do the job. Reckon i'll go with the 80 series arms though. There will be a add in the "wanted" section if anyone can help!! Thanks again!
