Outer Limits 4x4 Board

Posted: **Mon Nov 23, 2009 7:18 pm**

Hey guys, im just chasing a exact mm (millimetre) or cm (centimetre) of a nt zook diff and a wt diff track width. Im just preparing some information for the engineer, and I need to know the exact difference of the pair and also the overall track width of both.

Thanks in advance guys,

Superduki.

Posted: **Mon Nov 23, 2009 9:12 pm**

w/t 1320mm mounting face to face
n/t 1240mm not quoting i gust mesured it in the dark I had a torch thow

Posted: **Mon Nov 23, 2009 9:20 pm**

thanks champ appreciate it, can anyone confirm this?

Cheers!

Posted: **Tue Nov 24, 2009 5:00 am**

It's in the bible...

Posted: **Wed Nov 25, 2009 3:35 pm**

zukmeista wrote:It's in the bible...

Yeah.... thats nice if you can understand the abbreviation at the end of the numbers, cobber.

Posted: **Wed Nov 25, 2009 4:17 pm**

Superduki wrote:
zukmeista wrote:It's in the bible...
Yeah.... thats nice if you can understand the abbreviation at the end of the numbers, cobber.

Instead of rolling your eyes you could have asked .. what does WMS mean ? ( shows you have looked)
The measurements are in inches ..
WMS = wheel mounting surface.

Posted: **Thu Nov 26, 2009 3:45 pm**

love_mud wrote:
Superduki wrote:
zukmeista wrote:It's in the bible...
Yeah.... thats nice if you can understand the abbreviation at the end of the numbers, cobber.
Instead of rolling your eyes you could have asked .. what does WMS mean ? ( shows you have looked)
The measurements are in inches ..
WMS = wheel mounting surface.

Righto champ, I believe the eye rolling was done prior to me

but now I know that, I can convert that information.

Thank you, that is all.

Posted: **Fri Nov 27, 2009 1:51 pm**

Superduki wrote:
love_mud wrote:
Superduki wrote:
zukmeista wrote:It's in the bible...
Yeah.... thats nice if you can understand the abbreviation at the end of the numbers, cobber.
Instead of rolling your eyes you could have asked .. what does WMS mean ? ( shows you have looked)
The measurements are in inches ..
WMS = wheel mounting surface.
Righto champ, I believe the eye rolling was done prior to me but now I know that, I can convert that information.

Thank you, that is all.

Happy to have been able to help..

If you can show you have done a little bit of homework, you will be afr more likey to get good responses than just asking out and out questions.

Outer Limits 4x4 Board

NT 2 WT Diff Tech Question

NT 2 WT Diff Tech Question

diff width