Hi
Does any one know why the intake manifold on a TB42 is heated doesn't make sence as we use intercooler to cool the air why heat the intake. Can I block the hose that runs back to the thermostat houseing and join the two bottom hoses together or is there a reson for it.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
intake heater hoses
These vehicles and engines are exported all over the world , the heating of the throttle body is to prevent ice up or sticking in cold climates . if your not ever going to see those conditions i suspect it would be fine to joint them but don't block them off as it may inhibit flow to other areas and create air pockets
Nup not telling
you'll have to find out yourself
you'll have to find out yourself
Who is online
Users browsing this forum: No registered users and 0 guests