Page 1 of 1

regulations for winches and rollcages

Posted: Sun Nov 29, 2009 7:08 pm
by wanna lux
hey guys can anyone help me out im looking at startin to build a gq winch challenge truck. i would like to know the regultions on rollcages and how to get them approved and weather i cam run a pto winch.

thanks all help is appretiated

Posted: Sun Nov 29, 2009 7:17 pm
by pigletracing
jump onto extreme 4x4 motor sport & check out MMM's rule book,
or you could get in touch with sterlo & jo from the SSS which comp for there rule book.
or you could down load the CCDA (cross country drivers association) competition/ spefication & rule book.
cheers piglet

Posted: Mon Nov 30, 2009 10:06 pm
by wanna lux
thanks for the help i had a look at the ccda rules and i realy didn't understand can some one please dumb it down for me. i have a gq ute pics and any help would be realy good thanks

Posted: Tue Dec 01, 2009 8:48 am
by bazzle
wanna lux wrote:thanks for the help i had a look at the ccda rules and i realy didn't understand can some one please dumb it down for me. i have a gq ute pics and any help would be realy good thanks
Sadly you will have to Read and Learn the rules fully and get an understanding before you start competing. No short cuts.
You may not be at that level of comprehension yet.. but it will happen .

Bazzle

Posted: Tue Dec 01, 2009 11:29 am
by swb_ute
bazzle wrote:
wanna lux wrote:thanks for the help i had a look at the ccda rules and i realy didn't understand can some one please dumb it down for me. i have a gq ute pics and any help would be realy good thanks
Sadly you will have to Read and Learn the rules fully and get an understanding before you start competing. No short cuts.
You may not be at that level of comprehension yet.. but it will happen .

Bazzle
x2 if you dont understand the ccda rules dont try and build your own Roll protection here are the plans i am using to build mine over christmass
http://rapidshare.com/files/314543722/R ... 8.pdf.html

Posted: Thu Dec 03, 2009 8:43 am
by nic80
Hey swb_ute.

the diagrams that you have loaded are great!

Can the cages designed to these specs be used for CCDA events?

Thanks.

Posted: Thu Dec 03, 2009 11:55 am
by swb_ute
Those plans are from CCDA