Page 1 of 1
GU 3lt to a 4.2lt engine conversion!
Posted: Mon Nov 30, 2009 7:08 pm
by GU_BEEST
Hi, I was just wanting some info on putting a GU 4.2lt turbo diesel engine into a 3lt! The plan is to get a wrecked 4.2 and swap every thing over that i'll have to. Just wondering if the bellhousing on the gearbox is the same, the engine mounts line up in the same spot, if i will have to swap the dash over to siut the 4.2 loom? and pretty much if anyone has done it what things to look out for and and how straight foward it is! Thanks.
Posted: Mon Nov 30, 2009 8:08 pm
by Z()LTAN
contact smash250 on this forum, he may let you know what needs to be done.
He has just finished doing this.
PS
Its not easy
Posted: Mon Nov 30, 2009 8:41 pm
by vanbox
Definitely not all the answers, but a few facts in some of these posts...
http://www.outerlimits4x4.com/ftopic192 ... highlight=
Posted: Mon Nov 30, 2009 9:39 pm
by smash250
Try This mate there's a fair bit of info here.
http://outlaws4x4.com/?page_id=219
Posted: Mon Nov 30, 2009 9:51 pm
by GU_BEEST
Thanks heaps guys! It was a great help!
Posted: Wed Dec 02, 2009 3:03 pm
by +dj_hansen+
Andrew.hebble has just gone through this, best bet is to send him a PM.
Posted: Wed Dec 02, 2009 8:30 pm
by Andrew.hebble
Happy to answer any questions you need answers too. Also there are pics on mine going through the laminova intercooler setup atm in the General 4x4 tech area.
Cheers