More Artic
Posted: Sun May 23, 2004 10:50 pm
Hey Red Rocket
I took one bolt out of one of my rear radius rods today and went out.
It rolls noticiably more on the road and also pushes [understeers]some times on wet corners which it did not do before.
In racing the saying was" the hard end will always go to the wall",now I have softened up the rear by taking out the diff as an anti-sway bar the front is the firmer end.
This is with no anti-sways and running 33/15 BFG MTs at35psi.
At 12 psi on hard climbs,2nd low ,WOT ,she possibly pigrooted a bit more so more pressure in the Rancho's.
J Top
I took one bolt out of one of my rear radius rods today and went out.
It rolls noticiably more on the road and also pushes [understeers]some times on wet corners which it did not do before.
In racing the saying was" the hard end will always go to the wall",now I have softened up the rear by taking out the diff as an anti-sway bar the front is the firmer end.
This is with no anti-sways and running 33/15 BFG MTs at35psi.
At 12 psi on hard climbs,2nd low ,WOT ,she possibly pigrooted a bit more so more pressure in the Rancho's.
J Top