Outer Limits 4x4 Board

i am adapting a gear driven case onto my r150 box for a v8 conversion
will the top shift levers etc in my chain driven case fit in my new gear driven one.
by this i mean the internal selectors rather than the actual shifter lever.
any help would be much appreciated as i dont want to pull it apart and find it wont fit

you wanna swap the shift rails from the chain into the gear driven case??

that was the hope.
i am using the gear drive case so i can put low range gears in but the gear drive case is forward shift and it needs to be top shift to fit behind the r150 box.
i am happy enough to buy a kit to convert it if i have to but just thought i would use what i had if i could

ok, so you got a forward shift gear case. Just asked cause Im all for learning got some duals in the shed, just haven't pulled em apart myself.
Boof or Bubs should know.

Just convert the forward shift to top shift. No need for a kit.

Here's a few handy links:

http://www.pirate4x4.com/forum/showthre ... conversion

http://pirate4x4.com/forum/showthread.p ... =top+shift

http://www.4x4wire.com/toyota/tech/topshifter/