Page 1 of 1

351 clevo into GQ with TB-42 & auto, who makes adaptors.

Posted: Sat Dec 19, 2009 11:08 pm
by BLUE MQ
I am wanting to convert my GQ from TB-42 auto to put my 351 clevo in, dose anyone know who makes an adaptor kit to suit the oridginal GQ auto box, and What else is needed to do the conversion. I already have the 351 fitted into a TE cortina, so it has the rear sump and extended oil pick-up, it runs on straight LPG, with a home made duel throotle bodied set-up on it. currently running 8s over the 1/8th mile. So i am thinking of running it with all the current LPG set-up as it is tried and tested. any advice would be very helpfull.

Posted: Sun Dec 20, 2009 11:43 am
by ludacris
Dellows automotive.

Cris

351 clevo into GQ with TB-42 & auto, who makes adaptors.

Posted: Sun Dec 20, 2009 8:32 pm
by BLUE MQ
Ok, thanks 4 that, I looked in Dellows cataloge and it did'nt say anything about a conversion 4 the automatic box only the manual. But I will give them a call and see. Thanks again.
Jeff.

Posted: Sun Dec 20, 2009 9:03 pm
by ratbagpatrol
try marks 4x4 adpeters

351 clevo into GQ with TB-42 & auto, who makes adaptors.

Posted: Sun Dec 20, 2009 9:59 pm
by BLUE MQ
Hi, thanks I will try them also, if anyone on here has done the conversion can u please post some pic's for me to see, and is there any major problem to expect and overcome.

Posted: Mon Dec 28, 2009 9:11 pm
by gq351
Image

351 clevo into GQ with TB-42 & auto, who makes adaptors.

Posted: Tue Dec 29, 2009 9:17 pm
by BLUE MQ
Hi gq351, did u have any hassles with fitting the clevo in2 the GQ? Any problems that I will need 2 know about, any advice would b very helpfull b4 I start the conversion.

Posted: Wed Dec 30, 2009 4:59 pm
by gq351
hey mate, how are ya,, ive cut & pasted this a few times thought it might help?

the cleveland is a really tight fit on the firewall, i had to belt back the firewall 2 clear the heads, i used a kit from dellow automotive in sydney 0297744419, it comes with belhousing, engine mounts that i kept breaking so ended up using bronco/ f100 mounts!! & a nissan clutch plate, & spickit bush, it cost me $1045 to get it down to melbourne..
i just used standard v8 manifolds but is very tight on the firewall.
with the cable i got it made up longer & 2 suit the holley carbie.
for the cooling system i used EL falcon twin thermos with a XE V8 3' core radiator which keeps it cool enough,
deffinatly need a bronco 4wd v8 sump & pick up, i tried to get away with the standard but i sqashed da pick up 4wding & seized da first engine, so do it straight away coz it was very costly,,, the conversion was a pain in the ass to do but they do go really well, dellow make it sound very easy but there full of shit haha,,,

well after saying that i have now got a 454 BB chev in mine & my brother has used my old clevo conversoin,!!
JUST MAKE SURE you check your gearbox shaft lenth if you go manual as you might have to grind it down as it can put pressure on the crank causing it to fk up bearings, i found out the hard way :cry:

anyway i hope its some kind of help to you & if u have more questions just send a msg,, wish u luck , dont worry its well worth it,, jess

Posted: Wed Dec 30, 2009 5:59 pm
by gq351
NOTE''' the engine mounts on mine were dellow & always break (blue engine)... the mounts on my brothers are F100/BRONCO (bottom pics) ALOT BETTER!!

my GQ
Image
Image
Image
Image



MY BROTHERS GQ



Image
Image
Image
Image
Image
Image
Image

Posted: Wed Dec 30, 2009 6:00 pm
by gq351

351 clevo into GQ with TB-42 & auto, who makes adaptors.

Posted: Sun Jan 03, 2010 8:35 pm
by BLUE MQ
Hi, thanks for the pic's and all the handy info, it will b awhile b4 i am ready to do conversion, but i will slowly collect bits and pieces as i go, ur video's r sick of gq with clevo in it, can only imagine what it is like with 454 in it now.
With thanks Jeff.

Posted: Tue Jan 05, 2010 12:43 am
by gq351
no worries jeff it all helps i guess :) just let me know if you have any more questions im happy to help coz when i done mine a few years ago there wasnt much useful info going around,
yeah the 454 goes well now, if you wanna check out some videos my you-tube user name is GQ454 they all should come up of mine & more of my brothers with the clevo,

cheers jess

Posted: Mon Jan 11, 2010 7:21 am
by 351ciofgrunt
Yeah the 351c into a GQ is not the easiest engine conversion. But I'm a big fan of the 351 so thats why I converted mine.

Since I got it all sorted out I've been very happy with it.

http://www.youtube.com/watch?v=o4Ktoz2qYvU

Posted: Tue Jan 12, 2010 9:23 pm
by grinch2
it may be worth looking at running a ford auto as it will suit the power curve of the motor and i would think be stronger and easier to get to work together

Posted: Wed Jan 13, 2010 4:59 pm
by ludacris
grinch2 wrote:it may be worth looking at running a ford auto as it will suit the power curve of the motor and i would think be stronger and easier to get to work together
There are no adapters readily available of the shelf for ford auto to patrol transfer.

Cris