Outer Limits 4x4 Board

doing conversion 4 speed to 5 speed box need to change tail shafts that suit the 5speed ,,,the ones i have are lateish round ends and the diffs in the vehicle getting converted are the older square type member informed i will have to change the diff flanges is there a way i can just swap the flange end on the tailshafts knocking the unis out , or are they different unis ,,,really dont want to disturb the diff flanges if i can ....preload on bearing poitential leak etc , havent started pulling them apart to look so doing my homework first ,,,,any help apreciate guys

yeah u use the end of the old tail shaft on the diff side and other half of the 5 speed on the gearbox side

all 60 series tailshafts will mate with each other.

popeyehj60 wrote:yeah u use the end of the old tail shaft on the diff side and other half of the 5 speed on the gearbox side

all 60 series tailshafts will mate with each other.

cheers thanks for help