Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Valve tollerances for 2.5 bt 50
Moderator: Tiny
Valve tollerances for 2.5 bt 50
Just after the correct valve tollerances for bt 50 2.5ltr. Ute has 90thou on it and I did my own at 20thou, but only a semi educated guess at the corret tolerances.
if anyone is interested, Have just checked my valve clearances and all of the intake valves were very tight (could only just get a .05 feeler guage in). Exhaust side was tight as well. My Ute is at 90,000kms so 30,000kms before due date. I pitty anyones ute that hasn't been done at 20,000kms (I would hate to see their valves) This being said, I don't agree with the scheduled servicing in the book.
Who is online
Users browsing this forum: No registered users and 22 guests