Outer Limits 4x4 Board

hey
im after some info on what is a good tube bender to buy for some sliders and a bullbar.
wont be using it alot so dont need a real expensive one.
also what size pipe would be good for a tube bar and some sliders?
cheers

Dawn seem good.

we got the DAWN bow and arrow style one at work cost us like $1200 with all the dies.

Does a decent enough job for its price.

i use a $150 bow and arrow bender from ebay. then bought a 32NB die for $100 and have recently got a 40NB die for $110 it is a wide radius bend, takes alot of effort to use (alot more then a JD2) i like the result it produces most of the time.

Here you go. 2.6 seconds with the search button found these.

http://www.outerlimits4x4.com/ftopic191 ... ght=bender
http://www.outerlimits4x4.com/ftopic189 ... ght=bender
http://www.outerlimits4x4.com/ftopic184 ... ght=bender
http://www.outerlimits4x4.com/ftopic178 ... ght=bender

Hope this helps.

Cheers,

Micko