Page 1 of 1
Front axle specifications, 60 series and 80 series........
Posted: Sun Jan 03, 2010 8:14 pm
by flyology
Can anyone tell me is there is a difference in spline and diameter on either end between 60 and 80 series axles? I realize there is a difference in length, just wondering if you can put and 80 series axle into a 60 series diff centre.....
Posted: Sun Jan 03, 2010 9:39 pm
by Slunnie
Pretty sure you can, but a 60 diff wont fit into an 80 front housing.
Re: Front axle specifications, 60 series and 80 series......
Posted: Sun Jan 03, 2010 10:12 pm
by bad_religion_au
flyology wrote:Can anyone tell me is there is a difference in spline and diameter on either end between 60 and 80 series axles? I realize there is a difference in length, just wondering if you can put and 80 series axle into a 60 series diff centre.....
you can.
Posted: Mon Jan 04, 2010 7:18 am
by Hamo
80 series rear diff is the same as a 60 series rear diff but different ratio
80 series 4.11
60 series 4.1
Posted: Tue Jan 05, 2010 6:51 am
by vk7ybi
Hamo wrote:80 series rear diff is the same as a 60 series rear diff but different ratio
80 series 4.11
60 series 4.1
FAIL.
Posted: Tue Jan 05, 2010 9:45 am
by Slunnie
vk7ybi wrote:Hamo wrote:80 series rear diff is the same as a 60 series rear diff but different ratio
80 series 4.11
60 series 4.1
FAIL.
Actually that SFA tech is a FAIL.
