Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ifs to rears.. what bush to use??

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 28
Joined: Sat May 10, 2008 6:19 am
Location: brisbane

ifs to rears.. what bush to use??

Post by Wonderboy »

got everything ready to fit my ifs rears except the fixed pin bushes. just wondering what other members have used. will it be ok to buy the non genuine bush to suit the ifs leaves and just leave the tube out?? if not any suggestions......

cheers mick.
Top
Posts: 3201
Joined: Wed Oct 25, 2006 9:17 am
Location: Brisbane

Post by Lux_89 »

search dude. thousands of threads...try my thread for a start lol
Single cab 106r - BBP Turbo 3rz
*Boondal Backyard Performance*
Top
Posts: 826
Joined: Mon Mar 20, 2006 1:08 pm
Location: Redcliffe

Post by berad »

http://www.outerlimits4x4.com/ftopic48995.php

that thread has all the info you could ever dream of for all basic and not so basic hilux mods.

You have to beat the metal sleeve and replace it with.......
BBP Offroad
Boondall Backyard Performance

They call me the MR. throw cash at shiz til its comp specccccc
Top
Posts: 658
Joined: Wed Feb 13, 2008 5:41 pm
Location: Brissy

Post by yamaha__308 »

You're lucky im good with cut and paste:



They are an absolute prick to get out. I ended up drilling around the outside of the sleeve and hammering the fark out of it.

Bush part number to suit IFS and original pin is Kelpro 27014K.

You're welcome.
Top
Posts: 826
Joined: Mon Mar 20, 2006 1:08 pm
Location: Redcliffe

Post by berad »

i linished down a bit of tube i had lieing around that fitted perfectly inside the military wrap, worked a treat but by no means was it easy i think it took me over an hour to get the pair out, nor would i do it again haha.
BBP Offroad
Boondall Backyard Performance

They call me the MR. throw cash at shiz til its comp specccccc
Top
User avatar
HTH
Posts: 236
Joined: Thu Apr 09, 2009 9:37 am
Location: Coffs Harbour

Post by HTH »

i drilled mine out, as said by everyone else wasnt eazy!
snapped 2 drill bits (probably becuase i was angry).

i then burnt the excess out with a blow torch :lol:

GOOD LUCK
95 lux, Under Construction..
60% of the time it works ALL the time
Top
Posts: 28
Joined: Sat May 10, 2008 6:19 am
Location: brisbane

Post by Wonderboy »

all sorted guys stopped in at pedders and they pressed them out for nothing for me :) they were pretty quiet. picked up the correct bushes but the are not real tight around the fixed pin though.. will just have to pump them full of grease to take up the extra play :lol:

cheers mick
Top
Posts: 826
Joined: Mon Mar 20, 2006 1:08 pm
Location: Redcliffe

Post by berad »

I'd get the right bush's before putting them together, how loose are you talking.

Even a small amount will soon destroy the bush's and it will not handle properly.
Last edited by berad on Tue Jan 05, 2010 11:58 pm, edited 1 time in total.
BBP Offroad
Boondall Backyard Performance

They call me the MR. throw cash at shiz til its comp specccccc
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Wonderboy wrote:all sorted guys stopped in at pedders and they pressed them out for nothing for me :) they were pretty quiet. picked up the correct bushes but the are not real tight around the fixed pin though.. will just have to pump them full of grease to take up the extra play :lol:

cheers mick
Race play :D :D Give ya more FLEX!! :D :D :D
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 65
Joined: Tue May 15, 2007 8:01 pm
Location: bundaberg

Post by gutlux44 »

i brought the correct pins to suit ifs springs, then bashed the old pins out of the locating plate and welded the new pins into the plate. works great.
Top
Posts: 826
Joined: Mon Mar 20, 2006 1:08 pm
Location: Redcliffe

Post by berad »

I just bought the right bush's and needed no modifying of anything, you use aftermarket poly bushs for the front eye of the ifs spring dont buy the metal outer sleeve press in ones, the ones you want come with a metal sleeve inside where the pin goes that reduces it to suit the ifs pin which is 14mm, remove the sleeve and the poly will be 18mm that is the correct pin size of your hilux. the sleeve is not moulded into the bush it comes out with easy.

beside that anything will work with right od and id diameters.
BBP Offroad
Boondall Backyard Performance

They call me the MR. throw cash at shiz til its comp specccccc
Top
Posts: 28
Joined: Sat May 10, 2008 6:19 am
Location: brisbane

Post by Wonderboy »

sleeve is 19mm in the pedders bushes ill have to try a different make...
Top
Posts: 826
Joined: Mon Mar 20, 2006 1:08 pm
Location: Redcliffe

Post by berad »

Hrm, ring them up and ask them, they should push in firm, and shouldn't be loose.
BBP Offroad
Boondall Backyard Performance

They call me the MR. throw cash at shiz til its comp specccccc
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 62 guests