Page 1 of 1

info on 100 series solid front diff

Posted: Mon Jan 04, 2010 8:37 pm
by choccy
can any body tell me if a 80 series front diff center will fit in a 100 series solid axle 99 model 6 cyclinder petrol auto it is a constant 4wd does this matter

Posted: Mon Jan 04, 2010 8:44 pm
by v840
Try posting in the Toyota section.


I'm pretty sure the centres were the same, just the swivel hubs were different but it's been a while since I looked at a hunjy front. Nevertheless, post bewbs or GTFO. :finger:

Posted: Mon Jan 04, 2010 9:55 pm
by mike_nofx
gearing could be different depending on models

Posted: Tue Jan 05, 2010 5:07 am
by tas80
I was looking into this when I changed from an 80 to 100 series, general consensus was that the centres could be changed, I didn't end up doing it as the 100 series diesel runs a 4.3 ratio compared to the 80 series 4.1 so with bigger tyres as well would be a backward step, I wanted to change mine over to transfer the airlocker.

Posted: Tue Jan 05, 2010 5:35 pm
by crankycruiser
Yes it will fit BUT the 80's are 4.1 ratio and ALL 105's are 4.3....

Posted: Wed Jan 06, 2010 10:16 am
by Frankenyota
Are the diff ratios for the petrol 105 and diesel 105 cruisers the same?

Matt

Posted: Thu Jan 07, 2010 2:19 pm
by hdj105
All 105's run 4.3:1's.