Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Camper trailer Q's

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 240
Joined: Thu Dec 25, 2008 9:48 am
Location: Melbourne

Camper trailer Q's

Post by GU-ish »

hey all

planning out to start building a camp trailer soon.
want to build something pretty good that will last a while.

wat i had in mind was building a steel chassis and then getting an aluminium setup that bolts to it with kitchen + fridge slides and the rest built into it.
was wondering wat people thought of this idea?

also planning on doing ind.susp. setup and was wondering what bushes to use at the piviot point at the chassis. i was thinking of using the bushes out of GU control arms as i have to bent ones and i could just cut the end off?

any help would be great. also pics of setups you have made and things that work and dnt work.

cheers chris.
Top
User avatar
JWB
Posts: 451
Joined: Sun Aug 24, 2003 5:48 pm
Location: Logan

Post by JWB »

You could ask here === www.myswag.org

should get details needed :D
JB
Top
Posts: 384
Joined: Fri May 14, 2004 8:46 pm
Location: Yeppoon Queensland

Camper Trailer

Post by stinger »

FOr your suspension check out http://www.vehiclecomponents.com.au

These guys sell a complete independent suspension that allows you to adjust caster and camber and is easily welded onto your trailer chassis.

For about $1500 it comes with everything you need, shocks, drawings, mounting hardware, electric trailer brakes, hand brake, etc, etc.

Put one on my old camper trailer and it towed beautifully to Cape York and back with my lead foot.
Top
Posts: 826
Joined: Mon Mar 20, 2006 1:08 pm
Location: Redcliffe

Post by berad »

Use gal for the frame or ally if you have the funds, then it'll last forever if its looked after.
BBP Offroad
Boondall Backyard Performance

They call me the MR. throw cash at shiz til its comp specccccc
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

Give Barney a call or go see Hans and have a look at his.
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 240
Joined: Thu Dec 25, 2008 9:48 am
Location: Melbourne

Post by GU-ish »

Weiner wrote:Give Barney a call or go see Hans and have a look at his.
iv seen hans's one... barnie used a patrol diff and susp setup for it.

was just looking on GIC campers and they have done pretty much what i want to do. only more beefie...

i was thinking of using steel and then getting it galvanised... to hard to weld gal steel.
Top
Posts: 469
Joined: Fri Sep 10, 2004 1:45 pm
Location: Melb

Post by sootygu »

you want something like this?

Image
Image
Top
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

Use this for the lighting, hitches, braking, safety chain ect guidence. Its the Aussie wide accepted guide for the legalities. Also gives dimentiona requirements.

http://www.infrastructure.gov.au/roads/ ... index.aspx
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Top
Posts: 37
Joined: Sun May 11, 2008 5:54 pm
Location: esperance

Post by tazzashort »

have u priced much stuff up at the moment. i am building one at the moment and it is going to cost like 12g with every thing. (hard floor though)
Top
Posts: 1740
Joined: Thu Mar 01, 2007 12:45 pm
Location: Brisneyland

Post by RO8M »

Read this also.
http://www.outerlimits4x4.com/ftopic106712-0-asc-0.php
My name is Rob.

His name is Robert Paulson. His name is Robert Paulson. His name is Robert Paulson. His name is Robert Paulson.

This is legal advice.
Top
Posts: 240
Joined: Thu Dec 25, 2008 9:48 am
Location: Melbourne

Post by GU-ish »

sootygu wrote:you want something like this?

Image
Image

yes something exactly like that... did you do that your self or buy it??
any info would be great
Top
Posts: 240
Joined: Thu Dec 25, 2008 9:48 am
Location: Melbourne

Post by GU-ish »

sootygu wrote:you want something like this?

Image
Image

yes something exactly like that... did you do that your self or buy it??
any info would be great
Top
Posts: 1918
Joined: Fri Aug 26, 2005 4:28 pm
Location: Melbourne

Post by GUtripper »

A mate made one with GQ radius arms, a solid axle and coils/shocks with a panhard/track bar.
Relatively cheap and worked very well.

heaps easier than fabbing your own A arms.
Top
Posts: 469
Joined: Fri Sep 10, 2004 1:45 pm
Location: Melb

Post by sootygu »

GU-ish wrote: yes something exactly like that... did you do that your self or buy it??
any info would be great
Made them from scratch. You need some bending and turning, alright if you have contacts or mates in the trade but if not could be a hassle.

I have basic drawings if needed.
Top
Posts: 153
Joined: Mon Aug 30, 2004 12:51 pm
Location: Melbourne

Post by BrettInUte »

that is one neat set of trailing arms....
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 123 guests