Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

stainless snorkel elbows?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 28
Joined: Fri Jun 08, 2007 10:00 am
Location: Brisbane

stainless snorkel elbows?

Post by davegh2o »

Hey all,

What sort of shop stocks the big 3'' black elbows for the stainless snorkels?

I have everything else but can't, for the life of me, find someone that stocks the elbows?

Any help would be appreciated. In Townsville would be even better still.

Regards Dave.
Posts: 34
Joined: Wed May 13, 2009 8:33 am
Location: Weipa

Post by 8maddog8 »

I heard people get them from truck spares places. You could go ebay if you wanted silicone ones.
'96 GQ Wagon, RD28T @ 13psi and now Intercooled, 2 3/4" straight through, 2.5" + 2" Lift, 33's, front detriot locker, 12,000lb winch, snorkel, etc...
Posts: 1443
Joined: Tue Apr 12, 2005 3:57 pm
Location: Brisbane

Post by vanbox »

truck spares, will have them or can get them.
MUD BEERS and MAYHEM

DURAMAX POWERED GU
Posts: 79
Joined: Wed Jun 29, 2005 2:12 pm
Location: Townsville.

Post by Feenz »

Hey Dave eat a dick....
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

SS

Post by Clanky »

Any decent metal shop or fabricator can get them.
Or have a search on the net for mandrel bends
I found this one that sells direct and can post
http://www.smb.net.au/mandrelbends.htm# ... drel_Bends
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

QDS
Posts: 105
Joined: Sun Nov 18, 2007 7:12 pm
Location: Dont no

Post by msjc38 »

I think I have seen them at pirtek
Posts: 9
Joined: Thu Dec 17, 2009 5:50 pm
Location: Townsville

Post by Insano »

I got mine from Hitachi on Duckworth Street. Think they are about $30 each. Also found they were the cheapest for Donaldson Air Rams. [/img]
Posts: 206
Joined: Fri Feb 13, 2009 10:08 am
Location: Melbourne

Post by PBBIZ2 »

I got mine off ebay, approx $10 from memory for a 90 degree 65mm bend in SS 304, and about the same for 45 deg bend as well.
Posts: 317
Joined: Thu Dec 11, 2008 8:22 pm
Location: Oriental 4WD Adelaide

Post by mhgill »

any truck exhaust shop
GQ 5" coils 35" Muds FOR SALE
98 GU 4500 ST Stock.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests