Outer Limits 4x4 Board

Im looking to get another ute tray headboard hoop bent up.
(changed height of tray)


Its about 2.5 inch tube.
Also looking to get some 3/4 inch tube bent up too.


Can anyone recommend a good:
- engineering shop
- ute tray manufacturer
- backyarder with the right skills
- etc

Preferably on the west side of Melbourne.


Cheers.

swadesir

they have bent 50NB med for me before.(with a spoon mandrel not a ball mandrel because the bend angle was too small for a ball mandrel.)

www.swadesir.com

steve from gardbar is better, he is in basywater.