Page 1 of 1
Strengthening rear uper spring mounts on a GQ
Posted: Fri Jan 08, 2010 11:14 pm
by Clanky
Anyone have any pics or tips of their strengthening jobs on the upper rear coil mounts for a GQ wagon?
I have a 2" body lift which gives me a bit extra room to play
Posted: Sat Jan 09, 2010 7:50 am
by SuperiorEngineering
n
Posted: Sat Jan 09, 2010 7:50 pm
by Clanky
I like those.
Is there anything that Superior doesnt do?
Posted: Sat Jan 09, 2010 8:01 pm
by Spartacus
$25 ea =
How thick is the bolt on brace?
Posted: Mon Jan 11, 2010 8:34 am
by SuperiorEngineering
All the brackets as well as the top brace are all 6mm .
The corner braces are weld in.
Top brace is bolt in.
For most guys just bolting in the top brace is sufficient.
If your towers have brocken and torn the chassis it is recommended to do both.
We are working on a Wagon crossmember very soon but the corner braces can be used on them.
Posted: Mon Jan 11, 2010 8:49 am
by tagz281
Are the bolt in braces available for a GU Coil ute? Front and rear. If so what are the part numbers so i can order.
Thanks
Simon
Posted: Mon Jan 11, 2010 6:23 pm
by Clanky
SuperiorEngineering wrote:All the brackets as well as the top brace are all 6mm .
We are working on a Wagon crossmember very soon but the corner braces can be used on them.
The website says the one you have will fit a wagon with 2" body lift ( suits me). Are you talking for wagon with no BL?
Posted: Mon Jan 11, 2010 9:24 pm
by SuperiorEngineering
The brace and gussets fit the gq and gu ute with or without tray lift.
As far as the wagons you will need a 2 inch cab lift ( maybe one inch ? i will have to check when i have one in again) but the gussets fit either way.
Hope that clarified it a bit better.
All part numbers are on the web for you.
Posted: Tue Jan 12, 2010 7:54 pm
by Clanky
Good stuff.
The mighty 2" BL has come in handy yet again