Outer Limits 4x4 Board

Posted: **Sat Jan 09, 2010 3:52 pm**

how do i work out what ratio my rear diff is? or the easiest way. its a 95 swb 3.0l manual

Posted: **Sat Jan 09, 2010 4:33 pm**

95shorty wrote:how do i work out what ratio my rear diff is? or the easiest way. its a 95 swb 3.0l manual

http://www.outerlimits4x4.com/phpBB2/ftopic34204.php

Posted: **Sat Jan 09, 2010 4:59 pm**

-Scott- wrote:
95shorty wrote:how do i work out what ratio my rear diff is? or the easiest way. its a 95 swb 3.0l manual
http://www.outerlimits4x4.com/phpBB2/ftopic34204.php

3.0 V6 = 4.625, 4.875. - 2 different ratios listed?

the gearing on my bundy diff is 4.88 so im hoping the back will be the same?

Posted: **Sat Jan 09, 2010 6:58 pm**

It will be stamped on the alloy compliance plate on the firewall.

Posted: **Sat Jan 09, 2010 6:59 pm**

Bitsamissin wrote:It will be stamped on the alloy compliance plate on the firewall.

i had a look there but i couldnt find much other than the vin number

Posted: **Sat Jan 09, 2010 7:43 pm**

E05 D62 does this mean anything>?

Posted: **Sat Jan 09, 2010 8:28 pm**

95shorty wrote:
-Scott- wrote:
95shorty wrote:how do i work out what ratio my rear diff is? or the easiest way. its a 95 swb 3.0l manual
http://www.outerlimits4x4.com/phpBB2/ftopic34204.php

3.0 V6 = 4.625, 4.875. - 2 different ratios listed?

the gearing on my bundy diff is 4.88 so im hoping the back will be the same?

Sorry. AFAIK, all 3.0 shorties had the 4.875 diff, for a "sportier" drive - I'm fairly certain mine has. I thought that was in the FAQ.

95shorty wrote:E05 D62 does this mean anything>?

Yes. If you head over to http://www2.pajeroclub.com.au/forum/showthread.php?t=26 Pickle has put together a nice FAQ containing lots of code type information. E05 and D62 essentially means 3.0 V6 5 speed manual.

Somewhere on your compliance plate should be 4 digits indicating your diff ratio - have a look for 4875 or 4625.

Posted: **Sat Jan 09, 2010 8:56 pm**

-Scott- wrote: Sorry. AFAIK, all 3.0 shorties had the 4.875 diff, for a "sportier" drive - I'm fairly certain mine has. I thought that was in the FAQ.

my old shorty was 4.625 and it was 3.oL v6

dean

Posted: **Sun Jan 10, 2010 2:03 pm**

haha sorry guys i found the plate on the under side of the bonnet, my bad, turns out its 4.625 anyone know where i can get 4.88 from?

Posted: **Sun Jan 10, 2010 2:32 pm**

Yes I was going to add, if yyou can't find it on the firewall, they also put them on the underside of the bonnet.

Glen

Outer Limits 4x4 Board

riff ratio

riff ratio

Re: riff ratio

Re: riff ratio