Outer Limits 4x4 Board

might sound like a dum question but i am re-makin my trac bar and want 2 put heims or similar on all 3 attatchment points so that it can b adjusted 2 suit diffent heights and stuff.

wot size wood b suitable ??

the 1 i run on the front of it now is 3/4", wood 3 3/4" heims work or wood they be 2 weak ??

can any1 suggest sumthin else maybe ??

3/4 will be fine on all 3!

hypo, have a look at the ones sam sells, they are pretty groovy.. They are 1" x 7/8"??, I think..
Easy to use, greasable, strong, and you can use them with the poly bushes in the guts of em to take the harshness out.. and they are cheap!

wendle what is the price on these babies?

Myself or Sam can supply these Guy's. Most are in stock

Available in Left or Right Hand Thread Male or Female

3/4 UNF
$36ea

22mm x 1.5
$40ea

30mm x 2
$80ea
Other sizes available. These are the most common ones that I sell.
Peter. 0417-434 074

onall4 wrote:I can get these for you Guy's. Most are in stock

Available in Left or Right Hand Thread Male or Female

3/4 UNF
$36ea

22mm x 1.5
$40ea

30mm x 2
$80ea
Other sizes available. These are the most common ones that I sell.
Peter. 0417-434 074

those 3/4 ones do they have the poly bushes with them and are they greasable

cause the steel on steel ones are a bit noisy and clunky on the street

BJ, on the ones I was talking about the bushes are a seperate entity (similar to a 2-part nolathane sway-bar bush) they take the 1" eye down to something like 16mm ID. 3/4" heims wouldn't have a large enough eye to sleeve with a bush without the bolt size getting pretty little...

Good prices though...

The heims we use mainly are 25mm (wendle's) or 3/4 The 3/4 ones would be plenty strong enough for you track bar.
The 25mm ones we have the bushes and sholder bolts in stock and can sell them as a kit.
Heim joint bushes and sholder bolt $65.
SAM

Thanx 4 the help guys

SAM YGPM!!!

bj on roids wrote:

onall4 wrote:I can get these for you Guy's. Most are in stock

Available in Left or Right Hand Thread Male or Female

3/4 UNF
$36ea

22mm x 1.5
$40ea

30mm x 2
$80ea
Other sizes available. These are the most common ones that I sell.
Peter. 0417-434 074

those 3/4 ones do they have the poly bushes with them and are they greasable

cause the steel on steel ones are a bit noisy and clunky on the street

*They are Greasable
*They are metal to bronze.
*My best sugestion is to use a Larger Heim Joint & make a Bush & Crush Tube.
*I use a 30mm Joint. I use 2 FJ40 small eye bushes on each Joint, shorten each bush to correct width, & then make a crush tube to suit which ends up using a 9/16 UNF size Bolt.

Great conversion, I haven't had to replace any bushes at all. & they've been in my truck for 18 months now.

A 25mm Joint would OK on most Trucks!!!!!

Pete

onall4 wrote:

bj on roids wrote:

onall4 wrote:I can get these for you Guy's. Most are in stock

Available in Left or Right Hand Thread Male or Female

3/4 UNF
$36ea

22mm x 1.5
$40ea

30mm x 2
$80ea
Other sizes available. These are the most common ones that I sell.
Peter. 0417-434 074

those 3/4 ones do they have the poly bushes with them and are they greasable

cause the steel on steel ones are a bit noisy and clunky on the street

*They are Greasable
*They are metal to bronze.
*My best sugestion is to use a Larger Heim Joint & make a Bush & Crush Tube.
*I use a 30mm Joint. I use 2 FJ40 small eye bushes on each Joint, shorten each bush to correct width, & then make a crush tube to suit which ends up using a 9/16 UNF size Bolt.

Great conversion, I haven't had to replace any bushes at all. & they've been in my truck for 18 months now.

A 25mm Joint would OK on most Trucks!!!!!

Pete

AWESOME thanks for the info pete.... so the small eye FJ40 bushes, if cut down would fit perfectly into a 30mm joint from you? just cut them so they are not to wide? or do we have to shave the circumference as well?

You only have to shorten them. OD remains the same as they are a 30mm bush.
Pete

pete do u have any fotos of them ??

onall4 wrote:
Great conversion, I haven't had to replace any bushes at all. & they've been in my truck for 18 months now.



Pete

Pete you have only driven it twice in 18 months!

mickbj42 wrote:

onall4 wrote:
Great conversion, I haven't had to replace any bushes at all. & they've been in my truck for 18 months now.



Pete

Pete you have only driven it twice in 18 months!

Nice try cable boy.

hypolux wrote:pete do u have any fotos of them ??

I will try to take a pic 2day.
Pete

onall4 wrote:

hypolux wrote:pete do u have any fotos of them ??

I will try to take a pic 2day.
Pete

that wood b gr8 thanx.

didnt u break one of these at TT ??

hypolux wrote:

onall4 wrote:

hypolux wrote:pete do u have any fotos of them ??

I will try to take a pic 2day.
Pete

that wood b gr8 thanx.

didnt u break one of these at TT ??

If you are asking did i break a heim joint at TT. No...

Pete

onall4 wrote:

hypolux wrote:

onall4 wrote:

hypolux wrote:pete do u have any fotos of them ??

I will try to take a pic 2day.
Pete

that wood b gr8 thanx.

didnt u break one of these at TT ??

If you are asking did i break a heim joint at TT. No...

Pete

wheres your pics of your joints/links mate?

look 3 posts above "ill get some pics today"

I lent my camera to a mate.
I may get it back 2nite.!!!
Pete

onall4 wrote:I lent my camera to a mate.
I may get it back 2nite.!!!
Pete

damn mates puch him (just kidding)

So if we use the bush set up in these things that makes them acceptable for the engineers in nsw for rego ?