Page 1 of 1
GU front wheel studs
Posted: Sun Jan 10, 2010 4:15 pm
by was a 75
to replace the wheel studs on a set of front gu diffs, do i need to pull the hub apart to get it off or is there a way of pulling the whole lot off together. ive tried undoing the 6 17mm bolts holding it on but that did nothing. is there somewhere to get a diagram?? cheers
Posted: Sun Jan 10, 2010 5:54 pm
by vanbox
Have to pull the whole hub assembly off. Which means taking the bearings out.
As far I can remember the disc has to come off too.
Its a pain in the a$$ to do, but you get efficient when you have done it several time
Good time to re-pack wheel bearings too.
PAUL
Posted: Sun Jan 10, 2010 9:51 pm
by was a 75
thanx mate. anywhere online to download a free workshop manual??
Posted: Mon Jan 11, 2010 12:09 pm
by vanbox
Not that Im aware of, but the Gregory's manual is quite handy to have, around $40 from super cheap and the likes.
I learnt a few things by being friendly with my mechanic asking if I could hang around while they worked on my car. Now I do most things myself.
Posted: Tue Jan 12, 2010 2:45 pm
by canuck
was a 75 wrote:thanx mate. anywhere online to download a free workshop manual??
Patrol4x4.COM The link is in a sticky at the top of the GQ section