Outer Limits 4x4 Board

hey wounderin if anyone has done a ls1 or gen 3 in to a 75series landcruiser,

if so who does a kit
any drama's
any pictures ??

thanks

be much the same as an 80 series.. pretty easy to do really..

marks 4x4 do a kit.

marks do a kit for this but they dont fit them(the kits) anymore but im sure there will be someone round your area that will do the job if you dont ant to.

anyone got pics or more details

my brother did the conversion so i will direct him into here and he will be able to help you with any questions you have.
here is a link to his page on here.
the cruiser is in new south wales somewhere last i heard.
maybe around woolongong.

http://www.outerlimits4x4.com/ftopic146740-0-0-asc-.php

180OZT


i used conversion gear to suit chev/holden turbo pattern.

i went to a clutch shop and got a pressure plate to suit the ls1 and a 12" clutch plate with 10 spline holden centre to suit the input shaft extension.

wiring i got from Killas kustom kables in QLD his on here "killalux"

fuel i had a vn v8 fuel pump from a surge tank fed by a lift pump.

used the stock hj75 radiator and the hoses were on the correct side which worked well. it had a 16"thermo on it, worked well.

any other q's PM me

you would want to put the gearbox out of an 80 series in it H15x with part time transfer then u can use the 80 series ls1 bell housing and no pop boxes all the time
then be stuck buying weak boxes to fit to your adapter set up

thanks for the help