Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Help with Reassembling BJ42

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 13
Joined: Sun Sep 30, 2007 7:13 pm
Location: Brisbane

Help with Reassembling BJ42

Post by Iava65/40 »

After several years of hold ups and delays I am now bolting my Landcruiser BJ42 back together. It has been a while since I pulled it apart and some of the bags have deteriorated and all the bolts and screws are in one big mess. It was also partly disassembled when I bought it. Help with bolt and screw location, photos or links to any good rebuild sites would be greatly appreciated. If you like you can email photos directly to me njmauer@tpg.com.au
Top
User avatar
toaddog
Tickle me!
Posts: 3824
Joined: Wed Jun 23, 2004 11:25 pm

Post by toaddog »

Go and get a workshop manual
2008 Patrol wagon and 99 Patrol TD Ute
Cairns
Top
Posts: 4
Joined: Tue Dec 29, 2009 8:37 pm
Location: NSW

Post by craigwanderer »

toaddog wrote:Go and get a workshop manual
+1!

Also go visit the www.ih8mud.com forum (40 & 55 series tech section)
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

Just buy a heap or metric M6 and M8 stainless hardware and forget the stock rubbish
hands and mums dont count!!!
Top
Posts: 273
Joined: Tue Jul 01, 2008 3:52 pm
Location: GREENBANK

Post by AZZA'S HJ47 »

as bj said trow away the standard crap and buy 200m8 and 200 m6 stainless steel nuts and bolt i didnt even keep my nuts and bolts i just threw them in the bin retap any bolt hole that is tight and use plenty of never seize ;)
Top
Posts: 1912
Joined: Sat Feb 14, 2009 7:15 pm
Location: VIC

Post by beinthemud »

Had the same Problem
When I did my LJ70 Had all the Bolts seperated in Boxes ,
Took them with the Engine when that was being built, They acid dipped the lot and dumped them in the same Box
Had to work on the Theory if it Fits in the Whole thats were it goes.
Still Wonder were the 10 extra Bolts I have left go
Manuels= 4wd,cars,bikes,guns,trucks,race cars
Automatics=washing machines,dish washers,fridges
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 8 guests