Outer Limits 4x4 Board

Does anybody know what size the rear wheel bearing nut on a GQ is & where i can maybe get the right size tool for it or have most just made something to suit. Cheers Loz.

I cant remember what size it is off hand, but I used a ring spanner.
I seem to remember it being the same size as the toyota hub nuts.
Will see if I can find an old nut tomorrow and measure it for you

Although as an alternative you could do as the bodgey mechanics do and use a cold chisel and hammer

if thats the case it would be 54mm.

Just measured it and its 58mm across the flats
Big bugger eh?

Cool thanx mate. Cold chisel, lol. Yeh its a big sucker & has to be torqued big to. Cheers Loz.