Outer Limits 4x4 Board

hey guys just woundering if any one know where the centre pin is located on a ln106 stock spring,

and how do u normaly move your diff foward to clear 35's like drill perchs, droped hanger forward

and what is the difference between useing droped hangers or a droped cross member???

thanks for any help

Look in the bible for RUF and redrilling perch's

Redrilling along won't be enough to clear 35s properly, ruf and redrilling will, and then steering gets in the way of articulation then x over or hi steer steering is needed.

http://www.outerlimits4x4.com/ftopic48995.php

there is no ruff or redrilling in there

i will be going cross over, so i am guessing hilux rears have the centre pin more forward then front springs

Best way is to search mate.

I would be going histeer, longer shocks and hoops, RUF, dropped front hanger (more forward too if you like)

RUF:

http://www.outerlimits4x4.com/ftopic184 ... hlight=ruf

http://www.outerlimits4x4.com/ftopic183 ... hlight=ruf

http://www.outerlimits4x4.com/ftopic182 ... hlight=ruf

http://www.outerlimits4x4.com/ftopic180 ... hlight=ruf

http://www.outerlimits4x4.com/ftopic179 ... hlight=ruf

http://www.outerlimits4x4.com/ftopic178 ... hlight=ruf

http://www.outerlimits4x4.com/ftopic171 ... hlight=ruf

http://www.outerlimits4x4.com/ftopic163 ... hlight=ruf