Just picked up my first Feroza, and loving it. However, the engine fan is howling like a banshee. People run and hide if I'm reving over 2500. Tried spinning it by hand and i doesn't budge. Limited knoweledge here, but I assume I've got a cooked bearing or something along these lines.
Any thoughts?
And is there anyway I'll re able to rebuild / repack bearings / etc. vs replacing? From my reading so far on here, it seems replacement parts are pretty hard to come by... (located in Sydney for what it's worth)
Cheers,
Jesse
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Seizing fan
Moderator: Tiny
Viscous hubs are often available aftermarket- but they're very expensive ($200??? roughly.)
There's this option: http://cgi.ebay.com/ebaymotors/1990-90- ... 24011r4508
The fluid can be bought from Toyota (search on here), but I think you'll find the hub isn't really designed to be pulled apart.
There's this option: http://cgi.ebay.com/ebaymotors/1990-90- ... 24011r4508
The fluid can be bought from Toyota (search on here), but I think you'll find the hub isn't really designed to be pulled apart.
David
Who is online
Users browsing this forum: No registered users and 2 guests