Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Chev LS1 to Ford C4

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 190
Joined: Wed May 21, 2008 3:55 pm
Location: Coffs Harbour, NSW

Chev LS1 to Ford C4

Post by PacMan »

Hi all,

i am trying to put a Ford C4 auto on a Chev LS1 engine.

Has somebody here done that already?


Thanks
Chris
Top
Posts: 1175
Joined: Wed Jul 27, 2005 10:17 pm
Location: Mirboo North

Post by 6.5 rangie »

someone in the rover section has a c4 behind a chev, so half way there. think its a standard adapter
Damien


--------------------------------------------------------
Top
Posts: 190
Joined: Wed May 21, 2008 3:55 pm
Location: Coffs Harbour, NSW

Post by PacMan »

Hi Damien,

thanks for your answer.
I just wounder because the converter in a Ford C4 is mounted on with four bolts. Chev and Rover using only three.


Thanks
Chris
Top
Posts: 190
Joined: Wed May 21, 2008 3:55 pm
Location: Coffs Harbour, NSW

Post by PacMan »

Hi again,

and what is about the converter size.
Do i have to use distance plates between trust plate and converter in the same thick than the adaptor plate?

I never had anything to do with automatics.
Just used them. :?

Thanks
Chris
Top
Posts: 1175
Joined: Wed Jul 27, 2005 10:17 pm
Location: Mirboo North

Post by 6.5 rangie »

PacMan wrote:Hi Damien,

thanks for your answer.
I just wounder because the converter in a Ford C4 is mounted on with four bolts. Chev and Rover using only three.


Thanks
Chris
Ritters landrover used to do c4 conversions in rangies, not sure what they did about the 3/4 bolt converter. You could just get a 3 or 6 bolt converter made, its no big deal, just add more feet to it
Damien


--------------------------------------------------------
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests