Page 1 of 1

Transfer Gears in Auto 100 series

Posted: Sun Jan 31, 2010 10:38 am
by GUEEY
looking at buying a Auto 100 series FZE-FE for the Wife for Monday-Friday, but a Offroad getaway truck for the whole family on weekends, Always had manuals in the past, but there seems to be a drought on good clean manual Cruisers.
I am happy to install transfer reduction gear to assist in downhill run on!
Any thoughts or opinions would be great.

Grant.

Posted: Mon Feb 01, 2010 4:51 pm
by GUEEY
Jeez!

Getting any info out of you toyota boys is like getting blood from a stone.
Maybe i sould stick with a Nissan, atlest those guys offer some assitance.
:x :x

Posted: Mon Feb 01, 2010 7:31 pm
by Ice
http://www.marks4wd.com/products/gearma ... -gears.htm

or


slightly more expensive option

http://www.marks4wd.com/products/gearma ... rawler.htm

not much info on the cruiser crawlers out there, i got one cheaply and am since spending a lot to get it back running, there is an upgrade from the older ones to the newer ones which reduces the internal running rpm but its $1700 for the upgrade when you have an old box so you would be almost better off getting a new one and not having to worry about it

Posted: Mon Feb 01, 2010 7:48 pm
by GUEEY
Ice wrote:http://www.marks4wd.com/products/gearma ... -gears.htm

or


slightly more expensive option

http://www.marks4wd.com/products/gearma ... rawler.htm

not much info on the cruiser crawlers out there, i got one cheaply and am since spending a lot to get it back running, there is an upgrade from the older ones to the newer ones which reduces the internal running rpm but its $1700 for the upgrade when you have an old box so you would be almost better off getting a new one and not having to worry about it
Thanks for the reply.