Outer Limits 4x4 Board

does any one know much about these forms?

http://www.support.transport.qld.gov.au ... ms/QF1854/

Minor modifications
Many minor modifications can be carried out without obtaining written approval. Details of these modifications are outlined in section one of the booklet.

wats involved wat mods u have to or can list ? actually list etc..

thanks aaron

qld mod application is for any mod out side the blue plate system so yes most more majour stuff. I had to do one from my body lift. filled it out with everything on the car and they just approved the body lift so ima do another1 with only the sus lift nd see what they say ive had a fair bit to do with qld regs nd have all there regs in pfds on my come if you need anything.

so can u like apply for 4" suspension lift and they approve it? even though u are not aloud it ? type of thing ? pretty silly so my take is anything non standard.

because section one minor mods is like wheels, lift, driving lights, exhaust system, window tinting, croming, heating bendng of vicheals/suspension, fuel systems, vichel accessory, roll bars etc, visual display screen, Ariel, bull bars, wheels, tires, etc

sounds stupid as.

they may or may not its up to their descetion. The whole Qld system is stupid if you ask me coming from nsw. even if u get an engineers cert up here its still up to qld transport discertion if they approve it,

big lux wrote:they may or may not its up to their descetion. The whole Qld system is stupid if you ask me coming from nsw. even if u get an engineers cert up here its still up to qld transport discertion if they approve it,

yeh to me it just all doesnt make sense

Sorry to hi jack your thread but im having a bit of drama with the boys in blue in regards to running 33s on my rodeo. If i was to fill the form out and take the car with the 33s on to get inspected and they didnt approve it, can they issue a fine on the spot.
Cheers Ryan

snowyyy wrote:Sorry to hi jack your thread but im having a bit of drama with the boys in blue in regards to running 33s on my rodeo. If i was to fill the form out and take the car with the 33s on to get inspected and they didnt approve it, can they issue a fine on the spot.
Cheers Ryan

no idea im trying to get my head around it myself.

if it get approved when u send in the mod form then no they cant defect you ,saying this there is alreay a tyre standard and the mod form is only for mods without a prset standard.
Tyres
The maximum tyre width for a car or car derivative must
not be more than 1.3 times the vehicle manufacturer’s
widest optional tyre.
However, for an off-road passenger vehicle fitted with
front and rear beam axles, the maximum tyre width
must not be more than 1.5 times the vehicle
manufacturer’s widest optional tyre.

The rim diameter may be varied from the standard size
but the overall diameter of the tyre must not vary by
more than +15mm or -26mm.

They will not approve anymore than that i tried.

Oh and also just incase when i applied for my lift they jus sent me back standards paperwork stating u may lift you vehcile 50mm body with approval was approved and max sus lift is 1/3rd the origanal manufactures spec of bump stop to diff tavel. Qld transport are so much fun . Ima try get ICV rego when i do my extra cab chop.

so where can we obtain this info regarding mods ????
tyre width is 1.5 times that of standard ???
so body lifts are ok (2") and spring lifts (2")???
and no shackle lifts ???
and does an extra cab have to be an ICV and we do u get required specs for that ???

you can find all of it on the qld transport site they are all in downloadable pdf files.

cheers for that