air line for lockers
Posted: Thu Feb 04, 2010 4:08 pm
What sort of air line do i use with lockers
Page 1 of 1
Posted: Thu Feb 04, 2010 5:34 pm
Go to arb and buy the air line?
Posted: Thu Feb 04, 2010 6:04 pm
you can buy the blue arb one not sure how much it is or just measure the blue one and buy it from somewhere else if you can get it cheaper
Posted: Thu Feb 04, 2010 6:38 pm
Just go to a pneumatic fittings supplier and buy some. e.g. NeuForce in SYD.
http://www.neuforce.com/
http://www.neuforce.com/
Posted: Thu Feb 04, 2010 8:54 pm
Pretty sure lockers use 5mm lines
Posted: Fri Feb 05, 2010 12:00 am
yeah its just 5mm macroline... you buy it by the metre.
Posted: Fri Feb 05, 2010 7:57 am
were can you buy 5mm other than arb, i have tried smc pneu, lewis automation. some spots i deal with for work and they only do 4 or 6mm
sorry for the hi-jack.
sorry for the hi-jack.
Posted: Fri Feb 05, 2010 8:42 am
I remember reading somewhere about a place called http://www.neuforce.com/
But I can't for the life of me remember where.
But I can't for the life of me remember where.
Posted: Fri Feb 05, 2010 8:48 am
Or just convert to 1/4" or 6mm by changing push locks on either end.
Bazzle
Bazzle
Posted: Sat Feb 06, 2010 9:53 am
or save the hassle and buy 5mm pneumatic line from arb for $20 per 6M
Posted: Sat Feb 06, 2010 11:24 pm
DITTO!!tufflux88 wrote:or save the hassle and buy 5mm pneumatic line from arb for $20 per 6M
It's about the ONE thing that ARB DON'T overcharge for!!
Posted: Sun Feb 07, 2010 10:12 am
You know the stuff is worth about a $1.50/M not over charging by muchbigbluemav wrote:DITTO!!tufflux88 wrote:or save the hassle and buy 5mm pneumatic line from arb for $20 per 6M
It's about the ONE thing that ARB DON'T overcharge for!!
Posted: Sun Feb 07, 2010 10:27 am
Do arb solenoids regulate the pressure for the lockers or will I need to put a regulater on my tank probly a stupid question
Posted: Sun Feb 07, 2010 11:34 am
Do arb solenoids regulate the pressure for the lockers or will I need to put a regulater on my tank probly a stupid question
Posted: Sun Feb 07, 2010 11:43 am
you need to regulate the air supply to the soleniodsmahooody wrote:Do arb solenoids regulate the pressure for the lockers or will I need to put a regulater on my tank probly a stupid question
Posted: Sun Feb 07, 2010 11:52 am
Dude, there are SOME things that it's worth trying to save $9 on, and SOME things that just AREN'T!!!spazbot wrote:You know the stuff is worth about a $1.50/M not over charging by muchbigbluemav wrote:DITTO!!tufflux88 wrote:or save the hassle and buy 5mm pneumatic line from arb for $20 per 6M
It's about the ONE thing that ARB DON'T overcharge for!!
Posted: Sun Feb 07, 2010 11:58 am
i havent regulated mine i screwed the solenoids stright into the compressor
Posted: Sun Feb 07, 2010 1:10 pm
an ARB compressor is already regulated, he didn't mention his setup
Posted: Sun Feb 07, 2010 1:42 pm
ARB comps cut out at 100psi and cycle back in at about 70psi
Posted: Sun Feb 07, 2010 9:25 pm
Mine cuts out 150psi and comes back on at 100 so I reckon a locker won't take that limd of pressure
Posted: Sun Feb 07, 2010 9:50 pm
Local bearing shop was only about $3 cheaper on some 5mm line but black doesnt cut it,You gotta have Blue 
My only problam at the moment is trying to get ARB to get me in all the right fittings for down at my diff
My only problam at the moment is trying to get ARB to get me in all the right fittings for down at my diff
Posted: Sun Feb 07, 2010 9:53 pm
yes it will.mahooody wrote:Mine cuts out 150psi and comes back on at 100 so I reckon a locker won't take that limd of pressure