Outer Limits 4x4 Board

Whats the PCD on standard toyota 6 stud rims?

I have some of 15x13 alloy centerlines .. "(you know the classic centrelines with the full face inner)

They are a 13 inch wide 4 1/2 back spacing rim..

Since i have them sitting around and not being used on any more race cars...i though i might redrill and mount a decent set of tyres on them for the cruiser....

Or is this maybe a bad idea ?

6 on 5.5

13 inch rim, unless you are running 16 inch wide tyres, or more, i wouldnt even bother. You will spend more time re-seating beads than driving!

4.5 back spacing will probably be too much for a 15 inch rim on a cruiser.

wheel spacers not included

and thankyou