Page 1 of 1
springs
Posted: Sun Feb 07, 2010 4:11 pm
by GUEEY
As above.
Do GU/GQ Coils fit into 100 series cruisers.
I have good HD Dobbinson Coils in my GQ , i was wondering is they fit a 100.
I dont think so but its worth asking!!
Grant.
Posted: Sun Feb 07, 2010 9:40 pm
by crankycruiser
nope.
rears may go close, but fronts are way different
Posted: Mon Feb 08, 2010 8:32 am
by Auto-Craft
Rears wont work, closed coil vs blunt end, fronts will fit, but car will sit aprox 25mm lower than patrol, and the spiggott size on the diff is aprox 8mm smaller, so may "rattle" on the seat.
You will also need a flat ground top on the coil to make it work, vs patrol blunt end, otherwise the weight is being applied to a very small contact patch, which can crack the top spring mount on the live axle 105.
Re: GQ/GU Coils in 100 series
Posted: Mon Feb 08, 2010 10:09 am
by LOCKEE
GUEEY wrote:As above.
Do GU/GQ Coils fit into 100 series cruisers.
I have good HD Dobbinson Coils in my GQ , i was wondering is they fit a 100.
I dont think so but its worth asking!!
Grant.
Can supply new coils Grant, with the larger wheel openings, you can run left lift than a Datsun also.
Re: GQ/GU Coils in 100 series
Posted: Mon Feb 08, 2010 4:35 pm
by GUEEY
LOCKEE wrote:GUEEY wrote:As above.
Do GU/GQ Coils fit into 100 series cruisers.
I have good HD Dobbinson Coils in my GQ , i was wondering is they fit a 100.
I dont think so but its worth asking!!
Grant.
Can supply new coils Grant, with the larger wheel openings, you can run left lift than a Datsun also.
Thanks Lockee, only want to run 305/70s on the 100, what lift would i need???
Grant.
Posted: Mon Feb 08, 2010 4:37 pm
by LOCKEE
2 inch is all that is needed.
Posted: Mon Feb 08, 2010 4:58 pm
by GUEEY
LOCKEE wrote:2 inch is all that is needed.
whats 4 coils for a 100 worth these days.