Page 1 of 1

Heavy steering

Posted: Tue Jun 01, 2004 10:12 pm
by TUFF MAV
Went for a drive Sunday. Now steering has a tight spot turning right it's not there all the time. Seems to push the body sideways when it does it. Has anyone had this happen before.

Thanks in advance Kyle

Posted: Wed Jun 02, 2004 3:57 pm
by Area54
Have you checked all your links for bends, they may be binding/hitting on the chassis/diff/other place. Also check the steering stabiliser for dents etc, this will inhibit movement in one direction only.

Posted: Wed Jun 02, 2004 6:26 pm
by TUFF MAV
Everything seems to be alright, no bends or knocks. Happened on flat ground snatching out another car. (i think it happened then). Problem is it comes & goes.

Kyle

Posted: Wed Jun 02, 2004 7:05 pm
by bazzle
Loose power steering belt

Bazzle

Posted: Wed Jun 02, 2004 9:26 pm
by TUFF MAV
No belt is fine, fluids right.

Posted: Wed Jun 02, 2004 10:12 pm
by Woop
Check panard rod bushes for wear--wheel bearings for play or cracks in chassis where panard rod bracket bolts to chassis.

Nick

Posted: Wed Jun 02, 2004 11:04 pm
by big red
hmmm, could be broken CV...did you snatch backwards?

i would remove the steering stabiliser and check that first though.

Posted: Wed Jun 02, 2004 11:31 pm
by TUFF MAV
I was thinking CV .Didn't snatch backwards. Gave it a hard time going foward but. Dosn't seem to be making a noise but, drove it for 1 hr in 4 wheel drive after it happened.

Kyle

Posted: Thu Jun 03, 2004 8:21 pm
by J Top
Steering tie rod bent up,tie rod end clamps catching on bottom of shock pins.?I had one like this today.
J Top

Posted: Thu Jun 03, 2004 11:03 pm
by stocko
tuff75 wrote:No belt is fine, fluids right.

check swivel housing bearings

Posted: Fri Jun 04, 2004 7:10 pm
by TUFF MAV
I'm going to take it apart over the weekend.I'll let you know what i find.

Kyle

Posted: Tue Jun 29, 2004 8:57 pm
by TUFF MAV
Found the problem. It was something so simple. Jacked up the front & removed steering arms from both sides, wheels turned fine. Locked in hubs no clunks or noises. Checked tierods, turned freely. Put back together & went for a drive, same problem. Opened up bonnet removed all the hoses & wires to check flex coupling. This is when i found the problem. ****** fuel filter had dropped out of holder & was jamming the flex coupling, put back in holder. Problem solved.


Kyle

Posted: Tue Jun 29, 2004 9:24 pm
by bazzle
Took you a month to open Hood??

Bazzle :D

Posted: Tue Jun 29, 2004 9:40 pm
by TUFF MAV
Yeah i know, you get stuck working on other peoples cars all week, don't feel like working on mine when i get home. Plus i have 2 other cars to drive.


Kyle :D