Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

hydro trouble

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 1
Joined: Wed Jun 02, 2004 11:08 am

hydro trouble

Post by samystar »

I tested out the shop my new buggy with full hydro steering and sometimes it wont turn left... The steering wheel turns but not the cylindre. WTF?
-2x4 single ended ram
-stock Saginaw pump ~1450 psi 4 gpm acording to Bilavista article
-211-1048 Charlin
-5L reservoir plus filter
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Re: hydro trouble

Post by Guy »

[quote="samystar"]I tested out the shop my new buggy with full hydro steering and sometimes it wont turn left... The steering wheel turns but not the cylindre. WTF?
-2x4 single ended ram
-stock Saginaw pump ~1450 psi 4 gpm

acording to Bilavista article
-211-1048 Charlin
-5L reservoir plus filter[/quoe]




errr no idea .. Stickey valve or weak spring in the Charlin :?
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

sounds like a question for pirate
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Posts: 346
Joined: Sun Jun 22, 2003 6:23 pm
Location: Brisbane

Post by Yarno »

Is turnig left on the retract side of the cyl as this has less area than extend side, therefore less force if the pressure is to low! Maybe?
Go hard or go home!!!
MU build here
Posts: 733
Joined: Tue Jul 15, 2003 7:25 pm
Location: VIC working on my junk

Post by 308LUX »

any oil leaks on the cylinder ? could be bypassing
"The object of war is not to die for you country, but to make the other bastard die for his." - General George Patton
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests