Outer Limits 4x4 Board

Hey,

I cracked one of my higher pressure coolant lines for my garrett turbo, besides enzed or pertik, anyone recommend some places eastern suburbs or let me know what they paid for braided lines?

Someone told me they can use the old banjo ends and tig that to the new braided line but i was considering new lines all together...

i just used some heater hose ( small ) and apropriate ( sp ) sized fittings to push the hose on to and small clamps

unless you like the bling braided look ( fooly sik bro )

I went to Pirtek, in Bayswater, they did it on the spot

They used my Banjo ends, and sweated them onto a Braided hose, cost $80 odd, and that was for my Water line.

I should get the Oil done as well

B.D.R wrote:I went to Pirtek, in Bayswater, they did it on the spot

They used my Banjo ends, and sweated them onto a Braided hose, cost $80 odd, and that was for my Water line.

I should get the Oil done as well

hey thanks for that,

thats what i was hoping for i have 10k turbo pump setup i dont really want to skip on the lines with heater hose when im running 30 psi....

I got my speedflow fittings from dieseltec, i'm sure if andy doesn't have stock he can't point you to someone who can.