Outer Limits 4x4 Board

Has anyone had anything to do with the alloy radiators that are selling on ebay throught cars are us they are 390bucks new i just want to know if they are anygood or if id be better off just having my original radiator serviced cheers

i had one for a while and it was prpbably less efficient than the std 2 row copper and brass one! once it got hot it stayed hot longer than the std one.

i got the same one from bursons with 12 months warranty for 399 have had it for 10 or 11 months now always on 90 degrees now no more overheating anymore

my gq s got alloy radiator standard
just got it rodded
and the radiator shop recommended if i replace it with a new one to get a copper type ???

I got some 52mm core, triple flow ally radiators made up to suit GQs with TD42s. The end tanks are made from 3mm Ally sheet, not thin crap like some others i've seen from so called ally radiator experts. All the mounts are strong as. Come with billet filler neck. The factory shroud even fits as well.

They work a treat and only cost $660 each

cheers

OONDY

oondy, sounds good, i am in the market for one atm, can you post some pics of it??

i went cheapest alloy one i could get and now runs a fair bit cooler than the standard one (standard one was in pretty bad condition). have had it in for only about 3 months but very happy so far.

got mine through purplebus off here. cheaper than ebay and very helpful too.

i've had a fair bit of experience with chinese made intercoolers and radiators in drift cars and they've all prooved to be very good and cheap

big bundy wrote:oondy, sounds good, i am in the market for one atm, can you post some pics of it??

here ye go mate...





cheers

OONDY