Outer Limits 4x4 Board

Posted: **Wed Feb 17, 2010 2:30 pm**

any one no the the oil stem thread. is it M20 with 1.5 pitch.

going to buy a oil sandwich plate

thanks aaron

Posted: **Thu Feb 18, 2010 7:18 am**

Z115 filter is 3/4-16 UNF.

Posted: **Thu Feb 18, 2010 11:41 am**

if you have an early GU with by pass filter then :

Z503 (full flow) 3/4" x 16 UNF
Z416 (dual flow) 1"x 12 UNF

cookie

Posted: **Thu Feb 18, 2010 3:39 pm**

sorry dont know why i forgot the list the engine its a GQ TD42

so with the above they wouldnt work??

Posted: **Fri Feb 19, 2010 10:31 am**

I know Earls make a sandwich plate that will fit the GQ

Posted: **Fri Feb 19, 2010 3:21 pm**

festy wrote:I know Earls make a sandwich plate that will fit the GQ

is that to add on turbo feed lines, aftermarket senders etc ? do u have a link to a website or contact ?

thanks aaron

Posted: **Sun Feb 21, 2010 9:09 am**

Posted: **Sun Feb 21, 2010 9:36 am**

festy wrote:www.earls.com.au - catalog at http://www.earls.com.au/files/4a5be5950 ... APTORS.pdf
P/N 510ERL looks like what you're after?

sure is thanks mate

the oil stem thread gq td42