Page 1 of 1
rear panhard length
Posted: Thu Jun 03, 2004 8:08 am
by killalux
hey,
can some one give me the length of a standard rear panhard off a gq.
cheers
steve
Posted: Thu Jun 03, 2004 3:06 pm
by Daisy
1250mm end to end.
TOM
Posted: Thu Jun 03, 2004 10:00 pm
by big red
rear GU panhard is 971 C to C
front GU panhard is 854 C to C
upper GU trailing arm is 399 C to C
lower GU trailing arm is 676 C to C
Posted: Thu Jun 03, 2004 10:26 pm
by killalux
thanks guys, so the rear panhard is a lot shorter then gq, that will prob work better for what im doin. is the gu rear panhard straight or bent?
cheers
Posted: Fri Jun 04, 2004 8:47 am
by John H
killalux wrote:thanks guys, so the rear panhard is a lot shorter then gq, that will prob work better for what im doin. is the gu rear panhard straight or bent?
cheers
Nope, I think that one guy measured C-C while the other measured end-end. When you take that into account I think that you will find they are the same or very close to it.
Posted: Fri Jun 04, 2004 6:56 pm
by big red
killalux wrote:thanks guys, so the rear panhard is a lot shorter then gq, that will prob work better for what im doin. is the gu rear panhard straight or bent?
cheers
my 89 GQ and my 99 GU ute [small diff] both had a straight rear panhard rod.
the big diffs on the GU come with a bent panhard.
i now have an adjustable bent panhard as it clears the extended brake bracket better on my 7" lift
Posted: Mon Jun 07, 2004 7:56 pm
by killalux
big red wrote:rear GU panhard is 971 C to C
front GU panhard is 854 C to C
upper GU trailing arm is 399 C to C
lower GU trailing arm is 676 C to C
well after doin some measurements the rear panhard will be way to long.
any idea how much adjustability there is in a adjustable front panhard, i need something around the 810 mark c to c.
cheers
steve
Posted: Mon Jun 07, 2004 8:15 pm
by ozy1
trim the adjustable front, and re tap the theread, and you have an adjustable pan hard any length you want,