Page 1 of 1
changin ratio of my 105 from 4.3 to 4.1
Posted: Mon Feb 22, 2010 7:38 am
by disco4x4
Guys,
my HZ1 with aftermarket turbo requires the change, as the gear is currently too short
therefore I want to change the final ratio from 4.3 to 4.1
what would be the right way to do it ? and from were can I get the parts ?
thanks
Roy
2004 105 HZ1
Posted: Mon Feb 22, 2010 4:58 pm
by dow50r
Get diffs from a factory turbo. 4.1
Posted: Mon Feb 22, 2010 8:10 pm
by mike_nofx
Is the front CW&P the same between 105 (solid) and 100 (IFS)?
Posted: Mon Feb 22, 2010 8:14 pm
by mickdirt
I got my 4.3's from Terrain Tamer, I'd say they'd do 4.1's as well.. I'd have to look it up but they were cheaper then other's.
Posted: Mon Feb 22, 2010 8:31 pm
by GO79
why not go a taller tyre
two birds one stone
Posted: Mon Feb 22, 2010 9:28 pm
by disco4x4
already moved to 33" - but it was nto enough for the ratio
I will put the car on airbag springs next week (not polybag, but real spring bag - like Disco)
anyhow, do not see me moving to the next size of tyres
Posted: Tue Feb 23, 2010 1:17 pm
by thrashlux
does yours have the r series gearbox?
you can get the front diff center from and 80 and the rear from a td 100
you will load up your frail gearbox more
