Page 1 of 1
Crown Wheel & Pinion compatibilty with lockers
Posted: Thu Jun 03, 2004 8:45 pm
by bundytunna
just a quick question about the compatibility of lockers with CW&P Gear
if i put twin lockers in my diffs now with 4.11 ratios can i later upgrade to say a 4.6 ratio and keep the lockers i have or do i need to buy a different locker
i reckon i wouldnt need to buy different lockers but i am not to sure
any one got an idea???
Posted: Thu Jun 03, 2004 8:54 pm
by NICK
you can use the same lockers
NICK
Posted: Thu Jun 03, 2004 9:22 pm
by bazzle
Normally will be OK BUT also depends on what diff your talking about as you havnt said? as their are a few exceptions.
Bazzle
Posted: Thu Jun 03, 2004 9:30 pm
by NICK
bazzle wrote:Normally will be OK BUT also depends on what diff your talking about as you havnt said? as their are a few exceptions.
Bazzle
like toyota to nissan
NICK
Posted: Thu Jun 03, 2004 9:40 pm
by RUFF
NICK wrote:bazzle wrote:Normally will be OK BUT also depends on what diff your talking about as you havnt said? as their are a few exceptions.
Bazzle
like toyota to nissan
NICK
More like Dana. They have specific centres for specific gears.
Posted: Thu Jun 03, 2004 9:45 pm
by NICK
RUFF wrote:NICK wrote:bazzle wrote:Normally will be OK BUT also depends on what diff your talking about as you havnt said? as their are a few exceptions.
Bazzle
like toyota to nissan
NICK
More like Dana. They have specific centres for specific gears.
true, in that case would also apply to 80s or newer landcruiser, mq patrols, the G series patrols. So if you were to think about it only about half could be inter-changed between models.
NICK
Crown Wheel & Pinion compatibilty with lockers
Posted: Thu Jun 03, 2004 10:59 pm
by smiley
when you upgrade to the 4.6 diffs let me know i will be interested in the 4.11's
Cheers
Smiley
Posted: Fri Jun 04, 2004 6:21 pm
by bundytunna
ther r 60 series diffs
i was preety sure i wouldnt have to change lockers but wanted to make sure
got the chance to buy a cheap locker so wanna put that in the front
what gear ratio would be suitable if i am runnin 35's on a 2f 60 series cruiser later looking to go to 37's
4.6????
Posted: Sat Jun 05, 2004 5:09 pm
by NICK
what ever you run will be after market, unless you go to stout diffs but of memory they are 6.1 or 6.7
NICK