Outer Limits 4x4 Board

i currently have a 79 hilux with a 253 conversion in it, but i am having a problem getting a fly wheel dust cover for it, it has the original 5 speed petrol gear box in it.does anyone no where i could get a dust cover for it????

who made the conversion kit?
if you dont know post a pic of it someone may know who made it

79 model never had a 5spd, if it is a LN46 (diesel)they originally had a 4spd that can be rebuilt with the appropriatte parts to become a 5spd ,an are quite easy to make a dust cover for,just need 1mm plate an a jigsaw, But dont waste your time these boxs are to weak(4 blown up boxs sitting in the corner of my shed )
Th RN46 (Petrol) box can only be a 4spd, there is physically no where to put a 5th gear
If you've got a latter model box an dellow conversion ,dellow should be able to supply you with the cover

well i bought the car with the v8 and the 5 speed box in it, but i no it's a RN46 hilux, i will post some pics of the set up i got and i hope it might shead some light on what i actuall have.

redv8lux wrote:79 model never had a 5spd, if it is a LN46 (diesel)they originally had a 4spd that can be rebuilt with the appropriatte parts to become a 5spd ,

Hi redv8lux, I have an LN46 with the 4 speed, Do you have any info on how to rebuild these gearboxes with a 5th cog? I'm still running the 2.2l diesel NA, so i'm not too concerned about breaking it.

Cheers.

I'll send P.M

Gday, Just curious what is need to convert a 4 speed to a 5 speed.

Thanks

Nicos wrote:Gday, Just curious what is need to convert a 4 speed to a 5 speed.

Thanks

Its been awhile ,but from memory i had to change the selecter shafts an their lockouts on the 4th gear selectors ,fit selector fork for 5th ,
You have to remove the oil splash ring off the back of the main shaft an fit 5th gear assembly in its place ,an also fit the other 5th gear parts on the back section of the counter shaft ,
The kit to do the conversion can be bought from Automotive Transmission Components in Wagga.$450
You get everything but the bearing that goes on the back of the counter shaft in the extension housing $35 (Bearing O/haul kit is approx another $350)
Or i may still have the converted box (I'll have to have a look for it ) which you can have for $100 plus freight

yeha ok then, could you have a look for me. How strong are these boxes once they have been converted? Also where abouts are you located and how heavy you think the box would be if you still have it?

Thanks

yep no worries ,I'm in bairnsdale East Gippsland Vic
The boxs are around 30 kilos,
Their not to bad as long as you dont put a torquey 308 in front of them
Should'nt be a problem with a standard 253

yeah just going to put a 3l turbo in front of it, She should hold up ay... let me know if you still got it floating around

Cheers

I'll have a look if its still there an letyou know .