Hey Guys,
Looking at the possibility of a bellhousing
to mate a hilux diesel 4speed box to a 253 V8.
Would this adaptor fix my 22R 5 speed box??
What other motors could I fit to this other than the 253,
or is the 253 the way to go for reliabilty?
Alot of people put 253's in luxes so they must be ok?
Or should I just stick with the 7M-GE conversion?
I am having alot of problems finding a manual 7M or even
someone who is willing to separate a gearbox from a 5M manual.
Cheers,
Bart
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
V8 adaptor for hilux box
Moderators: toaddog, Elmo, DUDELUX
V8 adaptor for hilux box
The Lux is back. New and Improved v2.0!
The addapter for the 4spd is different to the 5spd one. I can get my hands on a 5spd bellhousing to suit a 253 if you need one.
253s are very reliable but are no powerhouse.
An early holden 5ltr(Aussie Pattern) motor will also bolt to this bellhousing.
Most people use the253 because they can be bought with warrenty for as little as $300complete from wreckers.
I have no advise for the 7M swap as i have not seen one done at all. However Suprasurf from NZ swears by them.
253s are very reliable but are no powerhouse.
An early holden 5ltr(Aussie Pattern) motor will also bolt to this bellhousing.
Most people use the253 because they can be bought with warrenty for as little as $300complete from wreckers.
I have no advise for the 7M swap as i have not seen one done at all. However Suprasurf from NZ swears by them.
i am looking at doing a 7m-gte conversion in my lux soon, and yes it is dificult to find a manual bell housing. suprasurf did mention in another post that he was lookin into making adapters to go from 3l diesel bellhousing to m series motor.
also keep an eye out on www.toymods.org.au in the for sale forum, never know ya luck.
also keep an eye out on www.toymods.org.au in the for sale forum, never know ya luck.
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
LS1 STANDALONE HARNESS $475ex
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
LS1 STANDALONE HARNESS $475ex
Who is online
Users browsing this forum: No registered users and 6 guests