Page 1 of 1
SHOCK ABSORBERS
Posted: Sat Jun 05, 2004 6:42 pm
by built4thrashing
THIS HAS PROB BEEN DONE A HUNDRED TIMES BUT WHAT SHOCKS ARE PEOPLE OUT THERE RUNNING IN THEIR TRUCKS.
CAN YOU LIST SUSPENSION MODS, SHOCK TYPE AND PART NUMBER IF KNOWN.
I need shocks for a 90 sierra with 2inch lifted leafs. still running standard length shocks.
Posted: Sat Jun 05, 2004 7:56 pm
by DeWsE
Your right its been done a few times.
This might be helpful
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=19970
Posted: Sun Jun 06, 2004 9:10 pm
by built4thrashing
it has been done but is not very clear on what ppl use.
Posted: Sun Jun 06, 2004 9:42 pm
by DeWsE
Well basically it would most probably fair to say that most people use Rancho's or OME.
As for me I have monroe I haven't had any probs but the suspension is pretty much stock.
Posted: Mon Jun 07, 2004 7:38 am
by moose
I run Celica rears ( up front )
& I used to run Sigma sedan rears ( up back)
Posted: Mon Jun 07, 2004 8:19 pm
by built4thrashing
looking at running lada / cj 5-8 jeep rear shocks in it. they compress to 312mm and extend to 511 compared to stock shox at 282 and 450
will have to put spacer on bump stop
what do ppl think
Posted: Mon Jun 07, 2004 9:41 pm
by OVERKILL ENG
Have tried Munroe,Rancho and Bilstein now run Procomps way better than the others.
SAM
Posted: Tue Jun 08, 2004 9:49 pm
by DeWsE
OVERKILL ENGINEERING wrote:Have tried Munroe,Rancho and Bilstein now run Procomps way better than the others.
SAM
Sam how did the price of the procomp compare to the rancho/ome/belstein?