Page 1 of 1
TD42 fan hub
Posted: Thu Mar 04, 2010 10:25 am
by brendo4b
i am just wondering if a viscous fan and from a tb42 will fit on and be ok to use on a td42 cheers
hub
Posted: Thu Mar 04, 2010 1:02 pm
by purplebus
hub and fan as 1 unit will fit but wont be as efficient. petty blades are a more rectangle shape and the diesels are more of a swoop? not sure how to describe them. some of the fans and hubs are interchangable but best to take the hub you want to use with you when looking for fan blades. the holes are out by about 5-10 mm from memory. before you bolt one on grab a tube of the viscous hub oil and put it in.
Posted: Thu Mar 04, 2010 3:11 pm
by Ezookiel
The diesel ones are serviceable, the petty ones aren't (unless you drill holes to empty and refill them etc). And after the overheating issues my diesel had with the wrong hub, I sure wouldn't be putting anything but a genuine Nissan diesel one onto a Nissan Diesel.
Posted: Thu Mar 04, 2010 4:11 pm
by bogged
Ezookiel wrote: sure wouldn't be putting anything but a genuine Nissan diesel one onto a Nissan Diesel.
x grenadeteenteenteenty..
Posted: Thu Mar 04, 2010 7:19 pm
by sudso
Anyone tried the Dayco ones for a TD42?
Posted: Fri Mar 05, 2010 12:00 am
by brendo4b
cheers i do have a hub off a diesel does anyone know how to adjust the cut in temp if i fill it will new oil a mate of mine said he heard there is a sight that explains how to replace oil and the check for correct cut in temp by using a sauce pan full of water or somthing anyone got any infocheers